• Super Steel Hanger with 2 screw holes installed on frame side rails - provides screw support both above and below the wire
  • A multiple screw hanger but without the bulk and size of a strap or D-ring hanger. Ideal for narrow frames
  • 2" long x 1/2" wide
  • Holds up to 50 pounds
  • Supplied with two #6 x 1/2 inch screws for each hanger
  • Super Steel Hangers are a wise option for softwood frames or any frame that might benefit from additional screw holding power
Item # Description/Size Price Quantity
HWR-109X
Super Steel 2-Hole Wire Hanger - 10 Pack
$8.00
HWR-109C
Super Steel 2-Hole Wire Hanger - 100 Pack
$36.00

    The Super Steel Hanger is a good hanger choice if you want the extra holding power of a multiple screw hanger but without the bulk and size of a strap or D-ring hanger. Super Steel Hangers are installed on frame side rails.

    Super Steel Hangers are a wise option for softwood frames or any frame that might benefit from additional screw holding power.

    1. Lay the frame face down on a blanket or soft surface.
    2. Hangers should be installed on the frame side rails, between one-quarter and one-third of the way down from the top of the picture.
    3. Measure and mark this distance equally both side rails.
    4. Pre-drill holes for the hanger mounting screws, being careful not to drill through the front of the frame.
    5. Attach the hangers to the frame with appropriate length screws.
    6. Attach appropriate size wire to the hangers using a single loop through the eye only. Do not double loop wire with this hanger.
    7. Leave enough slack in the wire so that when it is pulled taut up against the back of the frame, the center point of the wire reaches about half the distance between the hanger position and the top of the frame.
    8. Hang the picture on heavy Picture Hooks.