|
|
|
|
product images on this page are shown in black & white Please Note Minimum Quantity Requirements Before Ordering T-Head
Screw SEC-9
BULK
PRICING: $.35 for 250-499 $.33 for 500-999
$.31 for 1,000 or more
T-Head
Anchor SEC-10 BULK
PRICING: none
Wall
Bracket SEC-11 BULK
PRICING: $.14 for 250-499 $.13 for 500-999
$.12 for 1,000 or more
Wall
Bracket Screw SEC-12 BULK
PRICING: none
Wall
Bracket Anchor SEC-13 BULK
PRICING: none
Mounting
Plate SEC-14 BULK
PRICING: $.14 for 250-499 $.13 for 500-999
$.12 for 1,000 or more
Mounting
Plate Screw SEC-15 BULK
PRICING: none
ORDERING INFORMATION
In response to requests from customers wanting to purchase Lock-In Security Hanger components individually or in partial combination, we have made each Lock-In Hanger component available as a separate part number. Please make note of our Minimum Quantity Requirements with regard to these individual hanger component items.
Bulk price (quantity discount) break points, if available, are noted on the order forms above. These discounts are applied automatically when you submit your order online. Lock-In Security Hangers in complete sets are available in any quantity here. For most applications, T-Head Screws will require a Security Wrench for installation.
T-Head Screws are zinc-plated steel, 1 3/4" long. The outer thread dimension and "neck" of the screw is 1/4" wide. The upper "arms" portion of the screw measures 1/2" long x 1/8 wide x 1/16" deep. T-Head Anchors are blue plastic, 1 1/4" long. The anchor inside screw hole is .25" in diameter. The outside shank diameter is 5/16" at the neck. Mounting Plates are zinc-plated steel, 2" long x 5/8" wide and are offset upwards a little more than 1/16" at the center slotted section. The slotted section opening is 1/4" x 3/4." Mounting Plate Screws are 1/2" x #8 zinc-plated pan-head tapping screws with a phillips or "combo" (phillips & slotted) drive. Wall Brackets are zinc-plated steel, 1 1/2" high x 3/4" wide. The slotted screw hole measures 3/8" high x 3/16" wide. Wall Bracket Screws are 1" x #10 zinc-plated pan-head tapping screws with a phillips or "combo" (phillips & slotted) drive. Wall Bracket Anchors are red plastic, 1" long. The anchor inside screw hole is .21" in diameter. The outside shank diameter is 1/4" at the neck.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Current Page: Lock-In Security Hanger Components |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
