Light-Duty Plastic or Metal Hangers for Hanging Unframed Foam-Mounted Posters

  • Hanging hardware for the back side of foamboard
  • Inexpensive and easy to apply--attach in seconds
  • Hangers can be used with or without picture wire

Products 1-5 of 5
Show
zig-zag plastic hanger adhesive
Price: $7.50-$250.00
Availability: In Stock
Item #: HWR-108 -

Zig-Zag hangers are made of high-density plastic with a pressure sensitive foam-backed adhesive on one side. The plastic used to make the Zig-Zag hanger is twice as thick as other foamboard hangers of this type and the foam-backed adhesive grips the smooth surface of foamboard tenaciously. Helpful Notes about Plastic Foamboard Hangers Do not use wire in combination with foamboard plastic hangers. Picture wire can gradually slice through the plastic over time. If you want to use wire to hang...

plastic foamboard adhesive hanger self stick
Price: $4.50-$198.00
Availability: In Stock
Item #: HWR-3342 -

Foamboard plastic hangers have a pressure sensitive adhesive on one side. You simply peel off the adhesive release paper and apply the hangers to the back side of the foamboard. They can also be used on other types of smooth surface board (cardboard, poster board, illustration board, etc.), as long as the object to be hung weighs no more than than 1 lb. (one hanger) to 2 lbs. (two hangers). Helpful Notes about Plastic Foamboard Hangers Unless what you are hanging is very light or the...

kwik hanger for foamboard
Price: $3.50-$99.50
Availability: In Stock
Item #: HWR-4191 -

Kwik Hangers attach to foamboard by means of four sharp metal prongs on the underside of the hanger and an arrow-point anchor in the center. Once attached, the upper section of the Kwik Hanger is bent back slightly to create a hanging point. Foamboard metal hangers can be used on any type of paper-faced foam-centered board that is thick enough to prevent the hanger prongs from penetrating through to the front surface (3/16" minimum overall thickness). If you are dealing with thinner board, use...

round hole foamboard hanger
Price: $6.30-$225.00
Availability: In Stock
Item #: HWR-111 -

The Round Hole Hanger is sometimes referred to as a "Pender" or "Pender-type" hanger. This hanger performs well when hung on a picture hook. The Sawtooth Hanger is a better choice when hanging foamboard on wall nails or screws.  Foamboard metal hangers can be used on any type of paper-faced foam-centered board that is thick enough to prevent the hanger prongs from penetrating through to the front surface (3/16" minimum overall thickness). If you are dealing with thinner board, use a Zig...

sawtooth foamboard hanger
Price: $2.00-$55.00
Availability: In Stock
Item #: HWR-112 -

The Sawtooth Hanger is a good choice when hanging foamboard on wall nails or screws. If your prefer to hang on a picture hook, then we suggest the Round Hole Hanger.  Foamboard metal hangers can be used on any type of paper-faced foam-centered board that is thick enough to prevent the hanger prongs from penetrating through to the front surface (3/16" minimum overall thickness). If you are dealing with thinner board, use a Zig Zag Plastic Foamboard Hanger. Do not attempt to use metal...

Foamboard hangers are designed to hang posters or similar items that have been mounted on foamboard ("foamcore board") but are not framed. We offer two types of foamboard hangers that attach to the back side of the board and allow you to display the poster on your wall "as is."

Used properly, foamboard hangers cause no damage to the front surface of the board, so if you decide to have the item framed in the future, no harm will have been done to the artwork by the foamboard hanger.